CAMCooLER InstaCOOL 3Sixty – Cooler for Insta360 ACE Pro, ACE Pro 2
$54.95
The CAMCooLER InstaCOOL 3Sixty is designed as an active cooling fan solution for the Insta360 ACE Pro and Insta360 ACE Pro 2 camera overheating issues when used in a static environment. This cooling fan will help keep your Insta360 camera from overheating when recording sporting events, vlogging, creating YouTube content, as a dash cam, or in a small airplane! Use with the camera screen open or closed!
Product and Setup Video: https://youtu.be/dr-maP0lhnk?si=_cQtGQnrVAWKUa9P
- Add Speed Controller: https://camcooler.com/product/usb-cooling-fan-governor-zk-ufs/
- All cooler cases are manufactured with ASA Plastic, unless otherwise stated.
- Item on Backorder? Don't worry, we can quicky manufacture it and get it shipped out in the priority of order date. However, items that are out of stock and are NOT available for backorder have been discontinued or product delivery is unknown.
- With some of our products moving to Amazon Prime, we have matched the prices on our website and now offer Free Domestic Shipping on orders over $40 and reduced International shipping rates.
- Our coolers do not come with a wall USB charger adapter since most users will power them from a battery brick. However, the good news is that those old USB chargers you have lying around that aren't powerful enough to charge new phones will work just fine with our coolers due to their low power requirements.
- Anker Power Banks need "Trickle Charging Mode" to work with our cooling fans. At this time, there are no other known power bank issues. See our recommendations here.
- What is IP65? Read more here.
- The USB Speed Controller sold with our variable fans is NOT waterproof.
Without a cooling fan, overheating occurs within 15 to 30 minutes!
With a cooling fan:
4k 30fps – 4 hours plus, 105˚F in direct sunlight, 5000 rpm
8k 30fps – 12 hours plus, 75˚F indoors, 2400 rpm
When screen is open, the Insta360 Quick Release Mount must be used! (sold separately) The cooler relies on the Insta360 Quick Release Mount for proper indexing when the screen is open.
Mic Adapter Compatible. External microphone recommended.
Use with our ZK-UFS Optional Speed Controller to effectively manage fan speed across the entire range, from 2400 rpm to 7000 rpm. (5000 rpm without controller)
2400 rpm is normally sufficient when indoors with a room temperature of 75˚F, thus reducing the ambient fan and air noise for a recording studio environment.
Utilizing an ACE Pro 2, our testing resulted in 12 hours plus when recording 8k 30fps indoors at 75˚F with a fan speed of 2400 rpm. The recording was ended by a full 1TB memory card.
Outdoors indirect sunlight at 105˚F with a 5000 rpm fan, the ACE Pro recorded for 4 hours plus at 4K 30fps until sunset ended the recording.