CAMCooLER StreamCryo – Active Cooling for NearStream VM46-VM33-VM20

The StreamCryo is an active Cooling system for NearStream VM46,VM33, and VM20 cameras. It helps prevent camera overheating issues while recording and streaming live sporting events on GameChanger Team Manager or another streaming services.

Devices supported: NearStream VM46, VM33, and VM20

• With an integrated shade for passive cooling and dual blower fans for active airflow, the CAMCooLER™ system is built to prevent overheating in hot, static environments.
• Manufactured in the USA by a small business utilizing Fused Deposition Modeling (FDM) equipment. Over 5 years of testing and use in Arizona’s scorching hot summers!
• Variable Speed Fan with optional USB Speed Controller. Or plug the fan in directly for constant speed operation at ≈5000 RPM. Ambient fan noise is approximately 48 dBA at 2500 RPM, 64 dBA at 5000 RPM, and 72 dBA at 7000 RPM.
• External Mic: You will hear airflow if you rely on the camera’s internal mic—that’s the cooling system doing its job. Use an external mic for clean audio. (Pro Tip: Place microphone at least 18 to 24 inches away for best audio capture)
• High quality Dual Ball Bearing, IP68-rated fan. Fully Assembled Cooler.

Stop fighting overheating with wet towels and weak shade devices.
CAMCooLER™ is built from real-world testing in Phoenix’s extreme heat and proven cooling systems developed for action cameras—now engineered for NearStream cameras.

Performance Disclaimer
CAMCooLER™ systems are designed to reduce operating temperatures and extend recording time. Performance will vary based on ambient temperature, direct sunlight, airflow, camera settings, and device condition. Overheating may still occur in extreme conditions. CAMCOOLER LLC does not guarantee uninterrupted recording and is not responsible for lost or unrecoverable footage.

Power Requirements
CAMCooLER™ systems operate on 2.5V–8V DC unless otherwise specified. A 5V DC USB power source is recommended (standard for smartphones, action cameras, and most USB devices).
Do not exceed 8V DC, as this may permanently damage the cooling fans.

Cooler fan blades are sharp but operated at relatively slow speeds.  DO NOT stick your fingers or anything else in the fan blades at any time. Install the cooler over your device first and secure it using the method described in the instructions before applying power. Ensure your fingers and electrical cords are clear of the blades before applying power.

Environmental Ratings – IP68 Cooling Fan

Ingress Protection (IP68)

• Dust Protection: Completely dust-tight (no ingress of dust)
• Water Protection: Protected against water exposure, including splashing and water jets
• Submersion: Rated for limited immersion under controlled conditions only
  Not designed for continuous or real-world submersion

These precision FDM 3D-printed components are engineered for real-world performance—not cosmetic showpieces. Minor surface variations compared to injection-molded parts are normal and have zero impact on function, durability, or reliability.